MicroCav Anti-Cavitation Control Valve Trim
MicroCav trim is designed to effectively handle cavitation in Valtek control valves that require small flow rates, with maximum CV values ranging from 1.25 to 0.007.
The preferred application is with an angle-style valve body with hardened trim to effectively prevent cavitation damage. A slightly modified design can also be used on a limited basis for globe valve applications.
- Technical Data
- Advantages
- Contact
Technical Data
The MicroCav design utilizes a special plug that is closely guided within the seat ring. The plug head is engineered with a series of grooves that expand as they progress diagonally along the length and around the circumference of the plug head.
These grooves continually intersect with each other, allowing the fluid to pass through them while experiencing a continual increase in flow area, which enables staged pressure reduction. This staged pressure reduction occurs as the fluid impinges upon itself when the grooves intersect.
Advantages
- Effective cavitation elimination
- High-pressure drop capabilities
- Suitable for low flow rates
Contact our Valve Specialist Team
- Brendan Merrigan (External) – mob: 087 2598124
- Vicki McGrath – tel: 021 461 7207
- Brian Barry – tel: 021 461 7211
- Tim Quigley – tel: 021 461 7209
- Ross O’Donovan – tel: 021 461 7230
- Shauna O’Connor – tel: 021 461 7237
- Tel: 021 461 7200
-
PumpsNETZSCH
Progressive Cavity Pump
-
PumpsFlowserve
SIHI SuperNova Pump ZDN – Hot Water
-
PumpsNETZSCH
Multi Screw Pump
-
PumpsFlowserve
Mark 3 Recessed Impeller Pump
-
Mixing TechnologyChemineer
Chemineer HS Turbine Agitators
-
Mixing TechnologyGreerco
Greerco Pipeline Mixers
-
PumpsFlowserve
PolyChem S-Series ANSI Overhung, Non-Metallic Pump
-
PumpsFlowserve
Durco Mark 3 Pump – ANSI/ASME standard
Need help with finding the right technical solution?