2-Way Flush Tank Valve – Angle Stem

2-Way Angle Stem Tank valves provide actuator clearance on jacketed or insulated vessels.

FI-Series 9 (1/2″ through 6″): Flush tank bottom ball valve: PBM’s IGENIX® Sanitary Series 9 Flush Tank Ball Valve. “True Bore®” flush bottom tank ball valve with port through ball, seats, weld pad, and end fitting same as ID of tubing. (Type 316 L stainless steel with less than 2% ferrite., Hastelloy C-276, Carbon Steel, Hastelloy C-22, or other). body, ball, stem, weld pad, and end fitting, three piece swing-out valve design. Seats and seals shall be white TFM®. Seats shall provide both upstream and downstream bubbletight seal and be adjustable for in-line wear. Stem packing shall be live loaded white TFM® and/or S-TEFTM material. End fitting shall match to tubing connections. Orbital weld end fittings should have wall thickness to match connecting tubing and have a controlled sulfur content of .005% through .017%. Valves shall not require disassembly for welding. Body bolts and nuts shall be 18-8 stainless steel. I.D. and O.D. surface finish shall be the same as specified for tubing. Maximum working pressure to be 400 PSIG and full vacuum.

PBM Model number FI(material)-(size)9(end connection)

Contact our Valve Specialist Team:

Brendan Merrigan (External) – mob: 087 2598124                           

Internal Team

Vicki McGrath – tel: 021 461 7207

Brian Barry – tel: 021 461 7211

Tim Quigley – tel: 021 461 7209

Conor Foley – tel: 021 461 7206

Ross O’Donovan – tel: 021 461 7230 

Tel: 021 461 7200