ASi_007C_2

007 AS-interface Fieldbus Products

Product Description

Devices for monitoring and controlling on-off valves via the AS-i Fieldbus

The addition of a fieldbus interface protected within the 007 or 007C enclosure allows actuated valves to be directly connected to the AS-i bus. An appropriate Gateway can then allow connection to Fieldbus Foundation, Profibus or some other higher level system. EExd options are available which, when used in conjunction with the appropriate armoured cable, allow an AS-i system to be taken into a Zones 1, 2, 21 and 22.

  • Switchbox for direct connection to the AS-i bus (V2.1) (007/007T)
  • Switch / Solenoid unit for direct connection to the AS-i (V2.1) bus (007C)
  • Wiring via a single M12 DIN plug or cable piercing connector
  • Connector provided for hand held configurator
  • Neat, compact design with highly accessible internals
  • Ingress protection to IP667 or IP677 (7 joules impact)
  • Polyester coated aluminium
  • All internals protected from site damage
  • Mechanical or proximity end of travel switches
  • EEx d version for use in hazardous areas (V1.0 only) (007/007T only)
  • High visibility ” Klearvision ” polycarbonate visual indicator
  • Suitable for rotary and linear actuators
  • CE Marked – EMC / Low Voltage / ATEX Directive compliant
  • Gateways allow connection to Fieldbus Foundation or Profibus
CONTACT US