PA1/PL1 Bio-Sanitary Pressure Reducing Regulators

The Models PA1 and PL1 are stainless steel pressure reducing regulators designed to handle small to mid-capacity flow rates in sanitary biotechnical process piping systems.

These units are capable of control ling outlet pressure to a level between 2 and 140 psig (.13 and 9.6 Barg).

Angle style body with bottom inlet and side outlet.

Unit is cleaned to Cashco Spec. #S-1576. Interior of body polished per ASME BPE 1997 (SFV-4 10 micro-inch Ra finish).

Interior and exterior surfaces are electro-polished. A “non-wetted” guide in the topworks above the diaphragm provides stability at all set points.

Widely applied for processed food production — confectionery, beverages, nutritional supplements and artificial sweeteners.

May also be used in cosmetics production and specialty chemicals.

Would be found supporting fermenters, batching tanks, cookers, autoclaves, dryers and other similar equipment.

Size:

1/2″, 3/4″ (DN15, 20.)

PA1 Features:

Clean-in-Place (CIP) Self-Draining with a lock-open feature on the spring chamber area that allows the regulator to be cleaned with 50 psig (3.4 Barg) cleaning solution.

PA1 and PL1 Features:

Adjusting knob for frequent set point changes. All metallic parts are SST.

Applications:

Used in pharmaceutical industry in production of many health care products for both human and animal consumption.

Contact our Process Equipment Team:

Noel Bracken – Tel: 083 0891204

Conor Foley- Tel: 021 461 7206