Zook RAX Bursting Disc – Scored Reverse Acting Metal
The Zook RAX Bursting Disc (rupture disks) are Scored Reverse Acting Metal Rupture Discs designed to cover the majority of high-pressure bursting disc (rupture disks) applications and are designed to be used in the RAH Pre-Torque holder. This Pre-Torque holder is specifically designed for easier maintenance in your process line. They are a unique holder designed for use with multiple types of ZOOK Reverse-Acting metal rupture discs.
- Standard operating ratio of 90% of the marked rating on disc tag. May be extended to 95% of the minimum burst pressure. (Contact your Zook Supplier for operating ratio on pressures below 40 psig)
- Disc designs offer high cycle life (when compared to scored reverse-acting design discs)
- Sizes from 1″ (25mm) through 12″ (300mm)
Safety Relief Valve Protection:
When a disc is mounted under a Safety Relief Valve, the working components of the valve are isolated from hostile environments.
Option Liners:
TFE liners are available to provide protection from corrosive media. Please note that the maximum temperature ratings for discs supplied with liners are lower than on an unlined disc.
- Solid metal cross-scored disc designed for Non-fragmentation
- Standard operating ratio of 90% of the marked rating on disc tag. May be extended to 95% of the minimum burst pressure. (Contact your Zook Supplier for operating ratio on pressures below 40 psig)
- Disc designs offer high cycle life (when compared to scored reverse-acting design discs)
- Certified for gas service only
- Standard manufacturing ranges of 0%, -5%, and -10% ensures marked rating on disc tag does not exceed the MAWP of equipment
- Wide range of standard and exotic materials available
- Sizes from 1″ (25mm) through 12″ (300mm)
- Burst ratings from 27 psi (1.86 barg) to 1000 psig (68.97 barg)
- Withstands full vacuum without vacuum support
- Resists product build-up. The smooth convex side of the disc is exposed to the process media
- Unique alignment pin design ensures proper disc orientation into RAH holder
- 3-dimensional stainless steel tag permanently engraved with complete disc specifications
- ASME UD, CE, and TUV compliance available
Download Zook RAX Bursting Disc Spec Sheet
Download Zook RAX Bursting Disc Spec SheetDownload Zook RAX Bursting Disc Installation Instructions
Download Zook RAX Bursting Disc Installation InstructionsDownload Zook RAH Holder Spec Sheet
Download Zook RAH Holder Spec Sheet