SIHImulti Pump MSH

SIHImulti Pump MSH pumps are horizontal multistage centrifugal pumps of ring-section design, which meet the technical requirements of ISO 5199 / EN 25199. The type MSH is developed for the high-pressure range up to PN 160. The advanced modular design reduces the number of parts whilst maximising interchangeability. Optimal selection of impeller diameter and diffuser size for each pump ensures that the pump closely matches the required duty conditions.

Different hydraulic impeller and diffuser sizes can be installed in a standardised casing, thus enabling the pump to be designed exactly for the working point required. The first stage of each pump size is equipped with a suction impeller. Axial thrust is balanced by a combination of a balance drum and balance disc. For special applications an additional balance disc lift-off device is available. The balancing line is returned to the suction casing or in the upstream vessel. Standard suction casing construction is with axial or radial inlet nozzles. The shaft is sealed by packing or mechanical seal. A variety of designs are available (cooled or uncooled). The pump rotor is supported on the discharge side by oil lubricated anti-friction bearings and on the suction side by self-adjusting sleeve bearings, lubricated by the pumped liquid or by oil-lubricated anti-friction bearings. The casing components are sealed by O-rings. The pump casings are held together by external tie rods. The pump feet are bolted to the suction casing such as to facilitate different nozzle positions for extra piping flexibility. The pump is driven from the discharge side or from the suction side. All pump sizes can be provided with one or more dummy stages or with an interstage bleed-off device if required.

  •  and much more …

Technical Data:

  • Flowrate max. 250 m³/h
  • Head max. 1600 m Speed max. 3600 rpm
  • Temperature -10 to +180°C
  • Pressure Rating max. 160 bar
  • Shaft seal
    •  packed gland
    •  mechanical seal
  • Direction of rotation counter-clockwise, when viewed from discharge side

Applications for pumps of the SIHImulti range meet the specific requirements of many applications, including:

  • Waterworks, and water supply
  • Boiler feed
  • Pressure boosting
  • Irrigation
  • High-pressure cleaning
  • Heating
  • Condensate systems
  • Reverse osmosis
  • Chemical and Process
  •  and much more …

Contact our Pump Specialist Team:

Phil Soltan (External) – Mob: 086 185 3782

Internal Team

Adrian McSweeney – Tel: 021 461 7212

Paul-Fox Morris – Tel: 021 461 7231

Una Long (Pump & Service Support) – Tel: 021 431 7232

Tel: 021 461 7200