PBM Transmitter Isolation Valve

The PBM Transmitter Isolation Valve obtains accurate transmitter readings and replaces leaky knife gate valves. 2-Way ball valve features minimal dead space and positive shut-off. Calibration Port, CIP Port, 150# Flange, and Locking Handle standard.

Valve shall be a PBM Model “TI” Transmitter Isolation Valve (TIV), 316 stainless steel construction (body, ball,and trim), or optional Hastelloy, Titanium, 317 stainless, others) with 1.0-inch or 2-1/2-inch port diameter, with a tank side flange to accommodate both standard ANSI 3-inch 150-lb. Flange drilling and a 25 to 27 degree offset flange pattern. Instrument side flange shall be drilled to accommodate a standard ANSI 3-inch 150-lb flange drilling. Valve shall have a 1/4 turn manual lockable stainless steel handle. Valve shall have four (4) 1/4 inch NPT purge ports, each filled with a 1/4 inch MNPT plug made from the same material as the valve body. Seat and seal material shall be reinforced Teflon® with VTFE o-ring. PBM Valve model TI(material)-E5L-A.

For 2-1/2″ port diameter, PBM Valve model TI(material)-J5L-A

Features and Benefits of PBM Transmitter Isolation Valve:

● Minimal dead space prevents build-up –
● Purge ports and optional milled flats enable CIP and drainage without process interruption
● Standard calibration ports allow periodic in-line checks
● Bolt pattern accommodates  standard industry ANSI 150# flanged connections and retrofits to knife gate patterns
● Lockable handle is standard
● 90° turn handle enables easy open/close
● Hardware configuration allows separate bolting of valve to tank and transmitter to valve as an additional safety measure for hazardous media

● Replaces knife gate valves on holding tanks and process tanks in pulp and paper mills
● Can be used in industrial and sanitary applications, as well as steam
● Works well in any industry that must obtain pressure or level transmitter readings on tanks and vessels

Applications:

● Replaces knife gate valves on holding tanks and process tanks in pulp and paper mills
● Can be used in industrial and sanitary applications, as well as steam
● Works well in any industry that must obtain pressure or level transmitter readings on tanks and vessels

Contact our Valve Specialist Team:

Brendan Merrigan (External) – Mob: 087 2598124                           

Internal Team

Brian Barry – Tel: 021 461 7211

Darragh Rodgers- Tel: 021 461 7241

Miriam Adair- Tel: 021 461 7235

Ross O’Donovan – Tel: 021 461 7230 

Shauna O’Connor – Tel: 021 461 7237

Tim Quigley – Tel: 021 461 7209

Vicki McGrath – Tel: 021 461 7207

Tel: 021 461 7200