Mark One-X
The Valtek Mark One-X control valve is designed as an economy measure to permit installation of a small valve in a much larger line without using line reducers or expanders.
The valve is a standard Mark One, except for the body, which incorporates expanded outlets. Because line expanders and reducers are not used, field installation expenses are lower. Importantly, the Mark One-X costs less, since most of the parts are smaller than a full-size valve.
Because all parts of the Mark One-X, except the body, are identical to standard Mark One control valve, they are completely interchangeable, reducing the need for larger part inventories and ensuring that parts are available from existing stock.
- Advantages
- Documents
- Contact
Advantages
- Lighter weight compared to a larger, reduced trim valve
- Smaller component size
- Same advantages as the Mark One series
Documents
Contact our Valve Specialist Team
- Brendan Merrigan (External) – mob: 087 2598124
- Vicki McGrath – tel: 021 461 7207
- Brian Barry – tel: 021 461 7211
- Tim Quigley – tel: 021 461 7209
- Ross O’Donovan – tel: 021 461 7230
- Shauna O’Connor – tel: 021 461 7237
- Tel: 021 461 7200
-
PumpsNETZSCH
Progressive Cavity Pump
-
PumpsFlowserve
SIHI SuperNova Pump ZDN – Hot Water
-
PumpsNETZSCH
Multi Screw Pump
-
PumpsFlowserve
Mark 3 Recessed Impeller Pump
-
Mixing TechnologyChemineer
Chemineer HS Turbine Agitators
-
Mixing TechnologyGreerco
Greerco Pipeline Mixers
-
PumpsFlowserve
PolyChem S-Series ANSI Overhung, Non-Metallic Pump
-
PumpsFlowserve
Durco Mark 3 Pump – ANSI/ASME standard
Need help with finding the right technical solution?