HINGED EMERGENCY PRESSURE MANHOLE COVER VENT
Hinged Emergency Pressure Manhole Cover Vents provide emergency pressure relief for storage tanks that are exposed to an external fire. They are designed to open and provide pressure relief beyond the capacity of the normal breather vents. This design allows for higher pressure relief settings than are available on our Manhole & Emergency Pressure Cover Vent. The Hinged Emergency Pressure Cover Vent does not provide vacuum relief. Vacuum relief must be supplied by an operating vent.
These vents are mounted on the tank manhole flange. When properly installed, the device provides an effective vapor seal. Under emergency fire conditions, the cover can pivot open on its hinge and provide required relief, preventing damage to the tank due to excessive internal pressure. When tank pressure is reduced, the cover automatically recloses. The hinged design allows the use of a lever principal counterweight so that the pressure settings higher than those available on other dead weight loaded vents of similar size may be achieved. Full open flow capacity and automatic reclosing of vent as tank pressure decreases provide efficient and dependable emergency venting capability while minimizing amount of vapor unnecessarily vented to the atmosphere.
- Advantages
- Documents
- Contact
Advantages
The design also allows convenient access through the manhole opening for tank inspection and maintenance.
Documents
Do you have questions or comments about receiving a quote, our products, solutions and services, and support? Contact us by filling out the form.
- Brendan Merrigan (External) – Mob: 087 2598124
- Conor Foley - Tel: 021 461 7206
- Office Tel: 021 461 7200
-
PumpsNETZSCH
Progressive Cavity Pump
-
PumpsFlowserve
SIHI SuperNova Pump ZDN – Hot Water
-
PumpsNETZSCH
Multi Screw Pump
-
PumpsFlowserve
Mark 3 Recessed Impeller Pump
-
Mixing TechnologyChemineer
Chemineer HS Turbine Agitators
-
Mixing TechnologyGreerco
Greerco Pipeline Mixers
-
PumpsFlowserve
PolyChem S-Series ANSI Overhung, Non-Metallic Pump
-
PumpsFlowserve
Durco Mark 3 Pump – ANSI/ASME standard
Need help with finding the right technical solution?