• Home
  • Hicera pumps V series

Hicera pumps V series

High discharge accuracy
The main components such as the plunger and cylinder are processed with high precision of micron order, so it is possible to obtain high discharge accuracy. (Discharge accuracy : ±0.5%) By changing the angle of the pump head it is possible to freely adjust the discharge amount between 0 and maximum discharge.Excellent corrosion resistance
Materials such as silicon carbide (SiC), fluorocarbon polymers (PTFE) and stainless casting (SCS14) with excellent resistance to corrosion are used for parts that come in contact with the fluid. This makes it possible to use the pumps for handling a wide range of chemicals.

Dispense into a vacuum condition and removal from a high-pressure condition
Since there are no suction and discharge valves, it is possible to directly dispense a constant amount of fluid in a vacuum (negative pressure) without using a solenoid. Constant-volume dispensing is also possible if suction side is pressurized.

Capable of handling slurries and highly viscous fluids
The unique valveless construction and the excellent resistance to wear of SiC, it is possible to handle slurries with fast precipitation speed as well as abrasive slurries. Also, the pumps are capable of smoothly pumping highly viscous fluids up to a maximum viscosity of 20,000 mPa･s.
Note: The discharge accuracy drops for viscous fluids with a viscosity of 500 mPa･s or greater. Contact this company for details.

Special order products


Stainless bracket type
w / cleaning port

Specifications (50/60Hz)

Discharge capacity 0.30/0.4 to 1400/1682 mL/min
Max. discharge pressure 0.7 MPa
Main materials Alumina ceramic, SiC, SUS316
Required power range 6 to 40 W
Liquid temp. range 0 to 120 C deg.
Viscous liquid 20000 mPa•s (depending on model)
Slurry liquid Please contact us for details.
Seal method Lip seal

 

 

V series.pdf

V series.pdf