Electromagnetic metering pumps EHN series

Multi-voltage power source
Multi-voltage power source from AC100 to 240V for all models. You are now free from worrying about power voltage.
High resolution
Thank to digitized controller, stroke speed can be adjusted by 1 spm step from 1 to 360 spm. Combined with stroke length adjustment, you can do the fine adjustment from very small flow to maximum flow rate.

Pump head variation
Wide variety of standard pump head (VC/VH), automatic bleeding type (NAE) and high compression type (55 model).
Note : Refer to page 4 for details of NAE and 55.

Air vent valve
Small flow capacity models (EHN-10, 15 & 20) equip air vent valve. Air in the pump chamber can be easily released by turning knob.

Water/dust-proof
Each unit such as driving unit and control unit is sealed to make the pump IP66 equivalent water/dust-proof.
Note : Do not install pump outdoor.

 

Specifications

Max. discharge capacity 450 mL/min
Max. discharge pressure 1.0 MPa
Main materials PVC
Stroke rate 1 to 360 spm
Power supply AC 100 to 240V 50/60Hz single phase
Liquid temp. range 0 to 40 C deg.
Viscous liquid Please contact us for details.
Slurry liquid Can not be handled.
Functions of the controller EXT operation: Multiply (1 : n), Dividing (n : 1)
STOP function