Cora Tip 0 System telescopic

The Cora Tip 0 System telescopic is a loading/unloading system particularly designed to transfer product between two machines or between machine and bin thus guaranteeing a solution of continuity between machine to feed and bin to empty while avoiding direct contact between operator and product. The Cora Tip 0 System telescopic allows the operator to interface the machine to be served by the container and load it while also preventing the emission of the product in the production department. This happens thanks to the telescopic movement that allows the lifting and lowering of the system. This system was designed for loading and unloading of rotary dryers and bin filling.

Coras Tip 0 System telescopic is used in the discharging of the product from containers inside a dryer, avoiding contamination of the external environment. The operator via the STERI LIFT® raises, shifts and connects the container to the discharge pipe, the operator positions the dryer in the loading position and then connects the TELESCOPIC TIP “0” SYSTEM to the dryer
where the MAGNETIC SOLE VALVE is installed. Once the unloading is ended the Telescopic TIP “0” SYSTEM is disconnected and is ready to make a new discharge operation.

BENEFITS OF TIP SYSTEM 

• C.I.P.
• C.I.P. drying system
• Powder suction system

• Hoppers
• Intercepting valves
• Roller conveyors for the handling of the container inside the TIP SYSTEM ® loading area
• Bridge-breaker system ORIONE
• Trolley for drum handling
• In addition CO.RA. ® may advise the customer of the choice of the following additional components such as the Bin, containers and bicones where our valves are
  interfaced or load cell to detect the weight to be downloaded or already downloaded.