CORA Tablet Valve
The CORA Tablet Valve offers the customers a new option as far as the handling of the finished product is concerned. The unique silicone vane allows the opening and closing of the valve without any damage to the product. The CORA Tablet Valve is easy to disassemble and clean. It is used to solve product flow, control of capsules and pills.
CO.RA. ® TABLET VALVE solves the problem of interception and monitoring of flows in a pharmaceutical plant and particularly allows handling of capsules, pills, tablets, rubber and
silicone caps, using the same principle as the highly successful SOLE VALVE. The Tablet Valve was designed and is manufactured respecting the strictest hygiene norms and
avoiding recesses and interstices of any kind, thus allowing the operator to quickly disassemble and clean the valve without the use of any tools. It’s implementation derived from careful observation by CO.RA. ® Of the operator’s requirements during the most delicate pharmaceutical processes in a sterile room, especially the cleaning phase.
Equipment Served
- Packaging machines feeding
- Bottom valve for tablets, capsules, silicone caps, rubber caps containers
- More than 5000 different applications executed
The TABLET VALVE vane is coated and its outer surface is flexible. This allows opening/closing of the valve without damaging the product. The silicone is in accordance with FDA 21 CFR 177.2600 Standards. Operating principle: Product is held without any damage and can continue its flow as required.
- Easy to disassemble, inspect, clean, particularly the “quick release” series with “CLAMP”.
- Each valve bears the CO.RA. ® Trademark and identification batch number (ex: CO.RA. I/00/298/GP).
- Air commands 2 ÷ 6 bar (30 ÷ 87 psi).
Technical Features:
- AISI 316L (DIN1.4404) satin finished body (mirror polished upon request).
- Silicone butterfly certified F.D.A. 21 CFR 177.2600.
- No O-ring (OR) type seal on the shaft.
- Easy to disassemble, inspect, clean, particularly the âquick releaseâ series with âCLAMPâ.
- Reduced weight and dimensions.
- Materials: stainless steel and silicone (certificates upon request).
- Manufactured according to GMP.
- Suitable for tablets, granules.
- Traceability over time (batch number).
- High temperature resistant.
- Interceptor element interchangeable with ROTARY VALVE e SOLE VALVE.
- Each valve bears the CO.RA. ® Trademark and identification batch number (ex: CO.RA. I/00/298/GP).
- Anodized aluminium Pneumatic actuator.
- Air commands 2 ÷ 6 bar (30 ÷ 87 psi).
- Consumption per drive, pression 5,6 bar (80 psi): 3AD=1.68 LT/M.
CORA Tablet Valve Brochure
CORA Tablet Valve BrochureContact our Valve Specialist Team:
Brendan Merrigan (External) – Mob: 087 2598124
Internal Team
Brian Barry – Tel: 021 461 7211
Darragh Rodgers- Tel: 021 461 7241
Miriam Adair- Tel: 021 461 7235
Ross O’Donovan – Tel: 021 461 7230
Shauna O’Connor – Tel: 021 461 7237
Tim Quigley – Tel: 021 461 7209
Vicki McGrath – Tel: 021 461 7207
Tel: 021 461 7200