PolyChem VGRP Engineered Polymer Composite Sump Pump

Applications:
Corrosive Services,General Purpose,Water Treatment,Pulp and Paper,Chemical Processing,Utility,Metal and Steel Industry,Pollution Control,Plating

Industries:
Leaching Acid,Chemical and Liquor,Caustic and Chlor-Alkali,Bleach Chemicals,Auxiliary,Acid Transfer,OEM,Water Treatment,Water Supply and Distribution,Wastewater Collection and Treatment,Polymers,Plating, Galvanizing and Other Coatings,Pharmaceuticals,Automotive and Aircraft

Engineered Polymer Composite Construction offers cost-effective corrosion-resistance and is lightweight, non-galling, non-sparking, and non-conductive.

Unitized Case with Integrally Molded Flanges at the suction and discharge nozzles are fully gusseted to ensure structural soundness under extremes of applied nozzle loads.

Externally Adjustable, Semi-Open Impeller is inherently balanced and provides consistently high efficiencies while minimizing maintenance.

Shaft/Bearing System operates well below the first critical speed, resulting in less shaft whip and longer bearing life.

Bearings can be lubricated by external flush, or self-lubricated by the pump fluid.

Single-Piece Column is lightweight, filament-wound, reinforced fiberglass composite but generously sized and thick in cross-section for strength and rigidity.

 

  • Tapered “Polygon” impeller drive
  • “Pull-out” bearing retainers
  • Choice of shaft metallurgy
  • Options
  • Operating parameters
    • Flows to 565 m3/h (2500 gpm)
    • Temperatures from -30°C (-20°F) to 90°C (200°F)

PolyChem VGRP Engineered Polymer Composite Sump Pump Chart

Features:

  • Full basket strainer
  • NEMA in-line motor
  • Fiberglass mounting plate
  • Tapered “Polygon” impeller drive
  • “Pull-out” bearing retainers
  • Level controls
  • Choice of shaft metallurgy
    316 SS
    Alloy 20
    Hastelloy
    Titanium
  • 316 SS
  • Alloy 20
  • Hastelloy
  • Titanium
  • Options
    Simplex and duplex pit covers
    Float switches
    Particulate seperators
    Non-metallic lubrication lines
    Tailpipe
  • Simplex and duplex pit covers
  • Float switches
  • Particulate seperators
  • Non-metallic lubrication lines
  • Tailpipe
  • Operating parameters
    Flows to 565 m3/h (2500 gpm)
    Heads to 110 m (350 ft)
    Pressures to 17 bar (250 psi)
    Temperatures from -30°C (-20°F) to 90°C (200°F)
  • Flows to 565 m3/h (2500 gpm)
  • Heads to 110 m (350 ft)
  • Pressures to 17 bar (250 psi)
  • Temperatures from -30°C (-20°F) to 90°C (200°F)

Applications:
Corrosive Services,General Purpose,Water Treatment,Pulp and Paper,Chemical Processing,Utility,Metal and Steel Industry,Pollution Control,Plating

Industries:
Leaching Acid,Chemical and Liquor,Caustic and Chlor-Alkali,Bleach Chemicals,Auxiliary,Acid Transfer,OEM,Water Treatment,Water Supply and Distribution,Wastewater Collection and Treatment,Polymers,Plating, Galvanizing and Other Coatings,Pharmaceuticals,Automotive and Aircraft

Contact our Pump Specialist Team:

Phil Soltan (External) – Mob: 086 185 3782

Internal Team

Adrian McSweeney – Tel: 021 461 7212

Paul-Fox Morris – Tel: 021 461 7231

Una Long (Pump & Service Support) – Tel: 021 431 7232

Tel: 021 461 7200