007 AS-interface Fieldbus Products

Devices for monitoring and controlling on-off valves via the AS-i Fieldbus

The addition of a fieldbus interface protected within the 007 or 007C enclosure allows actuated valves to be directly connected to the AS-i bus. An appropriate Gateway can then allow connection to Fieldbus Foundation, Profibus or some other higher level system. EExd options are available which, when used in conjunction with the appropriate armoured cable, allow an AS-i system to be taken into a Zones 1, 2, 21 and 22.

  • Switchbox for direct connection to the AS-i bus (V2.1) (007/007T)
  • Switch / Solenoid unit for direct connection to the AS-i (V2.1) bus (007C)
  • Wiring via a single M12 DIN plug or cable piercing connector
  • Connector provided for hand held configurator
  • Neat, compact design with highly accessible internals
  • Ingress protection to IP667 or IP677 (7 joules impact)
  • Polyester coated aluminium
  • All internals protected from site damage
  • Mechanical or proximity end of travel switches
  • EEx d version for use in hazardous areas (V1.0 only) (007/007T only)
  • High visibility ” Klearvision ” polycarbonate visual indicator
  • Suitable for rotary and linear actuators
  • CE Marked – EMC / Low Voltage / ATEX Directive compliant
  • Gateways allow connection to Fieldbus Foundation or Profibus

Contact our Valve Specialist Team:

Brendan Merrigan (External) – Mob: 087 2598124                           

Internal Team

Brian Barry – Tel: 021 461 7211

Darragh Rodgers- Tel: 021 461 7241

Miriam Adair- Tel: 021 461 7235

Ross O’Donovan – Tel: 021 461 7230 

Shauna O’Connor – Tel: 021 461 7237

Tim Quigley – Tel: 021 461 7209

Vicki McGrath – Tel: 021 461 7207

Tel: 021 461 7200