MEN Single Stage, End Suction, Water Pump
- Applications:
General Purpose, Irrigation, Fire Protection, Drainage, Water Supply, Agriculture, Fountains, HVAC, Water Treatment, Circulating Water - Industries:
Water Supply and Distribution, Pressurized Water Reactors – Non-safety, OEM, Water Treatment, Desalination, Construction, Fire Protection – General Industry
Volute Casing Design has raised face flanges to ISO PN 10/16 or ANSI B16.1 specifications.
Precision Cast Closed Impeller with extended hub has fully machined shrouds and is dynamically balanced for high efficiency. Axial thrust is minimized by balancing chamber and holes on the rear side.
Elastomeric Bellows Mechanical Seal accommodates misalignment, end-float and seal face wear for improved reliability.
Sturdy Bearing Housing incorporates greased-for-life, large diameter, reinforced ball bearings protected by thrower and covers.
MEN Pumps Destined for Europe are CE marked and comply with the dimension requirement of the latest editions of EN 733 and DIN 24 255.
- Options
- Optional configurations
- Operating parameters
- Flows to 800 m3/h (3500 gpm)
- Temperatures from -10°C (15°F) to 140°C (280°F)
Features:
- Oversized stainless steel shaft
- Open seal chamber with integral vortex breaking ribs
- Back pull-out design
- Stainless steel studs and nuts
- Options
Packing or mechanical seal
ISO or ANSI flanges
Grease lubricated bearings
Casing wear rings - Packing or mechanical seal
- ISO or ANSI flanges
- Grease lubricated bearings
- Casing wear rings
- Optional configurations
MEN frame-mounted standard water pump
MENBLOC close-coupled standard water pump
MEN-SP cantilever sump pump
MEN-TI diesel-driven fire pump - MEN frame-mounted standard water pump
- MENBLOC close-coupled standard water pump
- MEN-SP cantilever sump pump
- MEN-TI diesel-driven fire pump
- Operating parameters
Flows to 800 m3/h (3500 gpm)
Heads to 140 m (450 ft)
Pressures to 16 bar (230 psi)
Temperatures from -10°C (15°F) to 140°C (280°F)
Speeds to 3500 rpm - Flows to 800 m3/h (3500 gpm)
- Heads to 140 m (450 ft)
- Pressures to 16 bar (230 psi)
- Temperatures from -10°C (15°F) to 140°C (280°F)
- Speeds to 3500 rpm
MEN End Suction Water Pump Brochure
MEN End Suction Water Pump BrochureContact our Pump Specialist Team:
Phil Soltan (External) – Mob: 086 185 3782
Internal Team
Adrian McSweeney – Tel: 021 461 7212
Paul-Fox Morris – Tel: 021 461 7231
Una Long (Pump & Service Support) – Tel: 021 431 7232
Tel: 021 461 7200