2-Way Clean Steam

2-Way valve for temperature swing and clean steam applications. Low Ferrite Cast or Forged.

Forged Valves

CS-Series 8 (1/2″ through 4″, DIN 11850 DN 8 through DN 100, ISO 1127 DN 8 through DN 80) PBM’s Forged IGENIX® Clean Steam Series 8, “True Bore®” ball valve with port through ball, seats, and end fittings same as ID of tubing. Forged 316 L stainless steel body and end fittings per ASTM A182F316L/DIN 1.4404, wrought or forged 316L ball and stem, low controlled ferrite, three piece swing-out valve design. Seats and seals shall be white TFM® with FDA approved EPR O-Ring Energizer. Seats shall have stainless steel encapsulation on ID. Body Seal shall be FDA approved EPR O-Rings with white TFM® backup seal. Seats shall provide both upstream and downstream bubbletight seal and be adjustable for inline wear. Stem packing shall be live loaded white TFM® and STEFTM material. End fittings shall match to tubing connections. Orbital weld end fittings should have wall thickness to match connecting tubing and have a controlled sulfur content of 0.005% through 0.017%. Valves shall not require disassembly for welding. Body bolts and nuts shall be 18-8 stainless steel. Interior surfaces shall be 20 RA or better with optional electropolish and finer mechanical finishes. Valve shall have integral mounting pad to allow adaptation to ISO 5211 for direct mount automation. All materials are FDA and USP23 Class VI compliant. Maximum working pressure to be 720 PSIG and full vacuum. Optional 300 Series stainless steel stem extension with locking lever for insulated lines.

Cast Valves

SI-Series 9 (1/2″ through 6″, DIN 11850 DN 8 through DN 150, ISO 1127 DN 8 through DN 100) PBM’s IGENIX® Sanitary Series 9 “True Bore®” ball valve with port through ball, seats, and end fittings same as ID of tubing. Type (316 L stainless steel with low controlled ferrite, Hastelloy C-276 or C22, or other) body, ball, stem, and end fittings, three piece swing-out valve design. Seats and seals shall be white TFM® with FDA approved EPR O-Ring Energizer. Seats shall have stainless steel encapsulation on ID. Body Seal shall be FDA approved EPR O-Rings with white TFM® backup seal. Seats shall provide both upstream and downstream bubbletight seal and be adjustable for inline wear. Stem packing shall be live loaded white TFM® and STEFTM material. End fittings shall match to tubing connections. Orbital weld end fittings should have wall thickness to match connecting tubing and have a controlled sulfur content of 0.005% through 0.017%. Valves shall not require disassembly for welding. Body bolts and nuts shall be 18-8 stainless steel. Interior surfaces shall be 20 RA or better with optional electropolish and finer mechanical finishes. Valve shall have integral mounting pad to allow adaptation to ISO 5211 for direct mount automation. All materials are FDA and USP23 Class VI compliant. Maximum working pressure to be 720 PSIG and full vacuum. Optional 300 Series stainless steel stem extension with locking lever for insulated lines.

 

Contact our Valve Specialist Team:

Brendan Merrigan (External) – Mob: 087 2598124                           

Internal Team

Brian Barry – Tel: 021 461 7211

Darragh Rodgers- Tel: 021 461 7241

Miriam Adair- Tel: 021 461 7235

Ross O’Donovan – Tel: 021 461 7230 

Shauna O’Connor – Tel: 021 461 7237

Tim Quigley – Tel: 021 461 7209

Vicki McGrath – Tel: 021 461 7207

Tel: 021 461 7200